Parts Information; Operator Panel; Operator Button; Indicator Lights - Rimage PrismPlus! Guia Del Usuario

Rimage PrismPlus! User Guide

Parts Information

Operator Panel

There are four indicator lights and an
operator button on the operator panel
located on the front of the printer.

Operator Button

Press the operator button to open and close
the printer tray. There is a yellow indicator
light in the center of this button.

Indicator Lights

The indicator light conditions described below reflect conditions on a Standalone Prism printer. Prism printers that are mounted
on autoloaders have different conditions. For conditions of printers on autoloaders, refer to the autoloader user guide.
Image Name Functionality
•
Error
•
•
•
Disc Not
Present
•
•
•
•
•
•
Active
•
•
Power
•
•
•
8
All manuals and user guides at all-guides.com
Operator Button with
Indicator Light
Disc Not Present
Indicator Light
Active Indicator Light
Power Indicator Light
The yellow indicator light located on the operator button illuminates when an error occurs while
printing.
The Error indicator light and the Disc Not Present indicator light flash when the printer is in
cleaning mode.
The Error indicator light illuminates and the Disc Not Present indicator light flashes at a slow
rate when the ribbon is out.
The yellow Disc Not Present indicator light flashes a fault code when an error occurs. After the
error is resolved, press the operator button to turn off the indicator light.
The Disc Not Present indicator light illuminates when the tray is empty or when the disc is not
properly clamped. When a disc is placed on the tray, the Disc Not Present indicator light turns
off.
In Multiply Copy mode, the Disc Not Present indicator light illuminates until the disc is removed
from the pad.
The Disc Not Present indicator light flashes continuously at slow rate when the ribbon is low
(less than 100 prints remain). This applies only to monocolor ribbons and only if you have not
changed or switched ribbons since loading the current ribbon.
The Disc Not Present indicator light flashes at a slow rate while the Error indicator light
illuminates when the ribbon is out.
The Disc Not Present indicator light and the Error indicator light flash when the printer is in
cleaning mode.
The yellow Active indicator light flashes when the printer is operating.
The Active indicator light flashes continuously at a slow rate when the printer is in AutoPrinter
mode.
The green Power indicator light illuminates when the printer is powered on.
The Power indicator light flashes when the system board requires reprogramming.
The Power indicator light turns off when the printer detects a bad pixel element in the print
head. The Power indicator light turns back on when a disc is placed on the tray and you can
continue to print discs. If you continue to print, small lines may occur in your print jobs. This is
an indication that the print head may require replacement.
The Power indicator light turns off when the printer is powered off.
110635_J