Change The Print Ribbon - Rimage PrismPlus! Guia Del Usuario

Change the Print Ribbon

Rimage supports only the use of Rimage brand ribbons in our printers. Printer issues that occur as a result of using ribbons by
manufacturers other than Rimage are not included under your Rimage warranty or maintenance agreement.
Tip: If ribbons are stored in an environment much different from that of the printer, allow time for them to become
acclimated to the new environment. Allow more time for greater temperature and/or humidity differences.
 Note
: If you are replacing the ribbon, now is a good time to clean the print head. Refer to
17.
1. Access the ribbon area.
a. Power on the Prism.
b. Remove the top cover from the printer.
c. Lift up the take-up roller so that the end with the gear comes up
first, then lift the take-up roller out of the printer.
supply roller to remove it.
d. Lift up the
2. Load the print ribbon.
a. Slide the print ribbon onto the supply roller.
b. Align the two notches of the cardboard core to the metal pins on
the supply roller.
c. Peel the ribbon leader from the supply ribbon.
d. Slide the ribbon leader under the ribbon guide.
3. Tape the ribbon leader to the back of the printer tray as shown.
110635_J
All manuals and user guides at all-guides.com
Maintain the Prism Printer
Clean the Print Head
Take-up Roller
Print Ribbon
Cardboard Core
Metal Pins
Supply Roller
Tape Ribbon Guide
Printer Tray Ribbon Leader
on page
Supply Roller
Notches
19