Clean The Print Head - Alternate Method - Rimage PrismPlus! Guia Del Usuario

Rimage PrismPlus! User Guide
Clean the Print Head – Alternate Method
If a cleaning kit is not available, use the following cleaning procedure.
Required tools :
#
•
99% Isopropyl alcohol
•
Cotton swabs
1. Prepare the Prism.
a. Power on the Prism.
b. Press the operator button to open the printer tray.
c. Power off the Prism.
d. Remove the top cover.
e. Remove the ribbon. Refer to
print head.
2. Clean the
-
Important! Do not remove the print head.
isopropyl alcohol to a cotton swab.
a. Apply
b. Insert the cotton swab in the drawer opening and lift the swab upward as you run the swab against the print head
elements.

Note: The bottom of the print head is shown to illustrate elements to clean.
3. Clean the front two ribbon guides.
a. Apply isopropyl alcohol to a clean
b. Run the swab against a ribbon guide to clean it.
steps a – b for the second ribbon guide.
c. Repeat
4. After the alcohol on the print head dries, prepare the
a. Install the ribbon.
b. Replace the top cover.
c. Power on the Prism.
The printer is ready for use.
18
All manuals and user guides at all-guides.com
Change the Print Ribbon on page 19.
cotton swab.
Prism for use.
Clean convex surface while print
head is still installed
110635_J