Product Characteristics; Product Accessories; Technical Parameters - YATO YT-82200 Manual Del Usuario

PRODUCT CHARACTERISTICS

A car polisher is a common power tool, II class of insulation, designed mainly for fi nishing works when processing metal, wooden
and plastic surfaces. Polishing is carried out by means of polishing pads mounted on polishing wheel. Correct, reliable and safe
operation of the product depends on proper operation, therefore:
Before starting the work with this tool, please read this manual and keep it properly.
Note! Dust generated when grinding some surfaces, can be harmful to health or even toxic.
The above remark concerns, among others grinding of surfaces coated with paints containing lead, some types of wood, some
metals (e.g. lead) and materials so while working you should use an eff ective dust extraction system, dust masks and other skin
and respiratory protection measures. The supplier does not assume any liability for damages resulting from failure to follow safety
regulations and recommendations specifi ed in this manual.

PRODUCT ACCESSORIES

The product is delivered complete and does not require any assembly. Preparation operations have been described later in this manual.

TECHNICAL PARAMETERS

Parameter
Type
Mains voltage
Mains frequency
Rated power
Rated rpm
Polishing wheel diameter
Polishing wheel mounting
Weight
Noise level
- acoustic pressure L ± K
pA pA
- acoustic power L ± K
wA wA
Insulation class
Oscillation level ah ± K
Protection class
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture. Water and moisture that gets inside the
power tool increases the risk of electric shock.
Do not overload the power cable. Do not use the power cord to carry, pull or unplug the power plug from the power outlet.
Avoid contact of the power cable with heat, oils, sharp edges and moving parts. Damage or entanglement of the power cord
increases the risk of electric shock.
In the case of working outside closed rooms, use extension cords intended for work outside closed rooms. The use of an
extension cord adapted for outdoor use reduces the risk of electric shock.
O R I G I N A L
10
GB
Measuring unit
[V~]
[Hz]
[W]
[min -1 ]
[mm]
[kg]
[dB(A)]
[dB(A)]
[m/s 2 ]
I N S T R U C T I O N S
Value
YT-82200
220 - 240
50
720
2100 - 5000
150
M8
2.2
85.0 ± 3.0
96.0 ± 3.0
II.
5.56 ± 1.5
IP20