Product Overview; Technical Parameters - YATO YT-82341 Manual Del Usuario

PRODUCT OVERVIEW

The plaster sander is an electric tool for sanding large, fl at wooden surfaces covered with gypsum plaster or plaster with sanding
paper or alternatively for sanding large, hard, fl at surfaces with a diamond sanding disc. The sander features a system for the
extraction of dust generated during work, and a hose with a bag which reduces the amount of dust in the work area. As the proper
use of the power tool is a condition for the correct, reliable and safe operation of it, please
Read and keep the entire manual before the fi rst use of the tool.
The tool supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
specifi ed in this manual.
ACCESSORIES
The unit is supplied as a complete package, but it requires some assembly work. The sander package includes
- sanding sheet
- diamond sanding disc,
- hose with a bag.

TECHNICAL PARAMETERS

Parameter
Catalogue No.
Power supply voltage
Power frequency
Rated power
Rated speed (disc)
Spindle size
Disc fi xing ring diameter
Sanding disc diameter
Diamond sanding disc diameter
Disc opening diameter
Weight
Noise level
- sound pressure L ± K
pA pA
- power L ± K
wA wA
Vibration level ± K (diamond / sanding paper)
ah,AG
Protection class
Ingress protection rating
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed power tools. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
Do not expose power tools to contact with atmospheric precipitation or moisture. Water and moisture that gets inside the
power tool increases the risk of electric shock.
O R I G I N A L
GB
Units
[V]
[Hz]
[W]
[min ]
-1
[mm]
[mm]
[mm]
[mm]
[kg]
[dB (A)]
[dB (A)]
[m/s ]
2
I N S T R U C T I O N S
Value
YT-82341
230 - 240
50
1300
800 - 1750
M14
180
180
180
22.2
3.5
97.0 ± 3.0
108.0 ± 3.0
8.96 ± 1.5 / 13.04 ± 1.5
II
IP20
15