Standby/On Indicator; Operating Environment - Pioneer PDP-5080XA Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

CAUTION

The  switch on this unit will not completely shut off

all power from the AC outlet. Since the power cord

serves as the main disconnect device for the unit,

you will need to unplug it from the AC outlet to shut

down all power. Therefore, make sure the unit has

been installed so that the power cord can be easily

unplugged from the AC outlet in case of an

accident. To avoid fire hazard, the power cord should

also be unplugged from the AC outlet when left

unused for a long period of time (for example, when

on vacation).

WARNING

This equipment is not waterproof. To prevent a fire

or shock hazard, do not place any container filed

with liquid near this equipment (such as a vase or

flower pot) or expose it to dripping, splashing, rain

or moisture.

This product complies with the Low Voltage Directive

2006/95/EC and EMC Directive 89/336/EEC,

amended by 92/31/EEC and 93/68/EEC.

WARNING

Before plugging in for the first time, read the following

section carefully.

The voltage of the available power supply differs

according to country or region. Be sure that the

power supply voltage of the area where this unit

will be used meets the required voltage (e.g., 230 V

or 120 V) written on the rear panel.

WARNING

This product equipped with a three-wire grounding

(earthed) plug - a plug that has a third (grounding)

pin. This plug only fits a grounding-type power

outlet. If you are unable to insert the plug into an

outlet, contact a licensed electrician to replace the

outlet with a properly grounded one. Do not

defeat the safety purpose of the grounding plug.

Operating Environment

Operating environment temperature and humidity:

+0˚C to +40˚C (+32˚F to +104˚F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light)

All manuals and user guides at all-guides.com

The following symbols are found on labels attached

to the product. They alert the operators and service

personnel of this equipment to any potentially

dangerous conditions.

This symbol refers to a hazard or unsafe practice

which can result in personal injury or property

damage.

This symbol refers to a hazard or unsafe practice

D3-4-2-2-2a_A_En

which can result in severe personal injury or death.

WARNING

To prevent a fire hazard, do not place any naked

flame sources (such as a lighted candle) on the

equipment.

D3-4-2-1-3_A_En

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat

radiation. For the minimum space required, see

page 14.

WARNING

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the

product, and to protect it from overheating. To

prevent fire hazard, the openings should never be

blocked or covered with items (such as

newspapers, table-cloths, curtains) or by operating

D3-4-2-1-4_A_En

the equipment on thick carpet or a bed.

STANDBY/ON Button

STANDBY:

the main power flow is cut and the unit is no

longer fully operational.