Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
09
Useful adjustment settings
Adjusting image positions and clock
automatically (PC source only)
Use Auto Setup to automatically adjust the positions and clock of
images coming from a personal computer.
1
Press HOME MENU.
2
Select "Option" (/ then ENTER).
3
Select "Auto Setup" (/ then ENTER).
A message screen appears and Auto Setup starts.
4
Press HOME MENU to exit the menu.
Note
• When Auto Setup is finished, "Auto Setup completed." appears.
• Even when "Auto Setup completed." appears, Auto Setup may
have failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the plasma television and
switch it on before starting Auto Setup.
• This function is not selectable when the PC is connected to the
HDMI terminal.
Adjusting image positions and clock
manually (PC source only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions and
clock of images when necessary.
1
Press HOME MENU.
2
Select "Option" (/ then ENTER).
3
Select "Manual Setup" (/ then ENTER).
4
Select the item to be adjusted (/ then ENTER).
Perform adjustment (/ and /).
5
With "Clock" or "Phase" selected, you can perform adjustment in
the parameter using /.
6
Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all the items, press / to select
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
• This function is not selectable when the PC is connected to the
HDMI terminal.
Selecting an input signal type
After connecting to the INPUT 1, INPUT 2, or INPUT 3 terminal,
specify the type of video signals to be received from the connected
equipment. For the type of the signals, see the operation manual
that came with the connected equipment.
36
En
All manuals and user guides at all-guides.com
Before starting the menu, press INPUT 1, INPUT 2, or INPUT 3 on
the remote control unit or press INPUT on the plasma television to
select an input source.
1
2
3
4
5
6
Colour system setting
If an image does not appear clearly, select another colour system
(e.g., PAL, NTSC).
1
2
3
4
5
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Input Select" (/ then ENTER).
Select "Input" or "Audio Select" (/ then ENTER).
Select a signal type (/ then ENTER).
You can select the video input terminal for "Input":
• For "INPUT 1", you can select "Video" or "RGB".
• For "INPUT 2", you can select "Video", "S-Video" or
"COMPONENT".
• For "INPUT 3", you can select "Video", "S-Video", or "RGB".
You can select the audio input terminal for "Audio Select":
• Select "SCART" or "RCA".
Press HOME MENU to exit the menu.
Note
• INPUT 1 or INPUT 3 is selectable only when "Disable" is selected
in the "Setting" for "HDMI Input".
• You can select the signal in each input terminal.
• The "Audio Select" is only available when "COMPONENT" is
selected in "Input" for "Input Select".
• If no image appears or images appear in inappropriate colours,
specify another video signal type.
• For the signal types to be specified, check the operation manual
that came with the connected equipment.
Press HOME MENU.
Select "Option" (/ then ENTER).
Select "Colour System" (/ then ENTER).
Select a video signal system (/ then ENTER).
• You can select "Auto", "PAL", "SECAM", "NTSC", or "4.43NTSC".
• With "Auto" selected, input signals are automatically identified.
Press HOME MENU to exit the menu.
Note
• The factory default is "Auto".
• You do not need to enter any setting if "HDMI Input" has been
selected.
• You need to perform colour system setting for each of "INPUT
1", "INPUT 2", "INPUT 3" and "INPUT 5".
• For the colour system setting, see steps 11 and 12 under Setting
up analogue TV channels manually on page 24.
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
