ASROCK H670 PG Riptide Manual De Instrucciones página 21

2.4 Expansion Slots (PCIe Slots)
There are 5 PCIe slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is
switched off or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
PCIe slots:
PCIE1 (PCIe 5.0 x16 slot) is used for PCIe x16 lane width graphics cards.
PCIE2 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
PCIE3 (PCIe 4.0 x16 slot) is used for PCIe x4 lane width graphics cards.
PCIE4 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
PCIE5 (PCIe 3.0 x1 slot) is used for PCIe x1 lane width cards.
PCIe Slot Configurations
Single Graphics Card
Two Graphics Cards in
CrossFireX
For a better thermal environment, please connect a chassis fan to the motherboard's
chassis fan connector (CHA_FAN1/WP, CHA_FAN2/WP, CHA_FAN3/WP or
CHA_FAN4/WP) when using multiple graphics cards.
18
PCIE1
Gen5x16
Gen5x16
TM
Mode
PCIE3
N/A
Gen4x4