Thinkcar THINKOBD 500 Manual De Instrucciones página 12

EN
To retrieve I/M Readiness Status data by one-click I/M readiness key: 1. Press the One-Click I/M
Readiness Key on the keypad and the following screen displays. Figure 4-30 Sample Diagnostic
Menu Screen 2. Colored LED and build-in beeper provide both visual and audible reminders for
emission check and DTCs. Below is the intepretation of the LED and build-in beeper. When the
LED is :
● Green - Indicates that engine systems are "OK" and working properply (the number of
Monitors equipped with the vehicle which have run and performed their self-diagnostic testing
is in the allowed range. MIL is off. ).No stored and pending DTCs exist. The vehicle is ready
for an Emissions Test.
● Yellow - The tool finds a possible problem. It indicates the following two conditions: (1) Pending
DTCs exist. Please check the I/M Readiness test result screen and use the Read Codes
function to view detailed codes information. (2) Some of the vehicle's emission monitors have
not working properly. If the I/M Readiness screen shows no DTC (including pending DTC), but
the Yellow LED is still illuminated, it indicate a "Monitor Has Not Run" status.
● Red - Indicates some problems exist with one or more of the vehicle's system, and the
vehicle is not ready for an Emissions Test. As well there are DTCs found. The MIL lamp on
the vehicle's instrument panel will light steady. The problem that is causing the illumination
of Red LED should be fixed before an Emissions Test or driving the vehicle further. The
built-in beeper works with the colored LED simultaneous, as an assistance to reflect the I/M
Readiness test results:
● Green - two long beeps.
● Yellow - short, long, short beeps
3. Select "REVIEW" and click "OK" to enter the REVIEW DATA list. Select "Review DTC" and
Next "OK" to View diagnostic records and delete records.
9