Helpful Tips; Measurement Procedure - TechLine Z-40 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Helpful Tips

Here are a few helpful tips to help you to obtain more accurate readings:
Do not measure your blood pressure immediately after consuming a large meal. To obtain
more accurate readings, please wait one hour before measuring.
Do not smoke or drink alcohol before measuring your blood pressure.
You should not be physically tired or exhausted while taking a measurement.
It is important that you relax during measurement. Try to take a 20-minute rest before a
reading.
Do not take measurements if you are under stress or under tension.
Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a
while before taking a measurement.
If the monitor is stored at very low temperature (near freezing), have it placed at a warm
location for at least one hour before using it.
Wait about 20 minutes before taking the next pressure measurement.

Measurement Procedure

1. Press the User-Switching key to select Memory Zone 1 or Memory Zone 2.
2. Place the cuff on the wrist. Press the ON/OFF/START . All digits will light up, checking
the display functions. The checking procedure will be completed after about 2 seconds.
3. After all symbols appear, the display will show a blinking "0". The monitor is "Ready to
Measure" and will automatically inflate the cuff to start the measurement.
All manuals and user guides at all-guides.com

Publicidad

Tabla de contenido
loading

Tabla de contenido