Cautionary Notes - TechLine Z-40 Manual De Instrucciones

3. Change the date, the hour, and the minute as describe in Step 2 above, using the "
key to change and the
4. "0" will reappear, as the Blood Pressure Monitor is ready for measurement again.
Troubleshooting
If any abnormality will arise during use, please check the following points.
Symptoms
No display when the
START key is pressed
EE symbol shown
display or the blood
pressure value
displayed excessively low
(high)
Note:
If the unit still does not work, return it to your dealer. Under no circumstance should you
disassemble or repair the unit by yourself.

Cautionary Notes

1. The unit contains high-precision components. Therefore, avoid extreme temperatures,
humidity, and direct sunlight. Avoid dropping or strongly shocking the main unit, and protect it
from dust.
2. Clean the blood pressure monitor body and the cuff carefully with a slightly damp, soft cloth.
Do not bend the pre-formed cuff inside out. Do not wash the cuff or use chemical cleaner on it.
Never use thinner, alcohol or petrol (gasoline) as cleaner on it.
3. Leaky batteries can damage the unit. Remove the batteries when the unit is not used for a
long time.
key when the cuff is not placed around the wrist.
4. Do not press the
5. The unit should not be operated by children to avoid hazardous situations.
6. If the unit is stored near freezing, allow it to acclimate at room temperature before use.
All manuals and user guides at all-guides.com
key to confirm the entries.
Press the
Blinking month
Increasing month
Confirm the entry
Check Point
Have the batteries run down?
Have the batteries polarities
been positioned incorrectly?
on Is the cuff placed correctly?
is
Did you talk or move during
measurement?
Did you shake the wrist with the
cuff on?
key
Correction
Replace them with two new alkaline
batteries.
Re-insert the batteries in the correct
positions.
Wrap the cuff properly so that it is
positioned correctly.
Measure again quietly. Keep wrist
steady during measurement.
"