Chassi Nxt90 Select; Assembly Of The Chassis; Assembly Of The Rear Wheels; Assembly Of The Front Wheels - Emmaljunga NXT90 SELECT Manual De Instrucciones Y Servicio

CHASSI NXT90 SELECT

1) ASSEMBLY OF THE CHASSIS

1.1 Unfolding the Chassis
Release the transport lock by pulling the rear
and front leg firmly apart until you hear a "Click"
WARNING
There must not be a child in the
pram when it is folded or unfolded
WARNING
Avoid having children in the vicinity
when the pram is folded or unfolded.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
1.2 Fold out the rear leg.
1.3 Press the bar in the middle of
the chassis until you hear a clear "click".
Make sure left and right side "Click" in properly.
1.4 Make sure that you now see the closed
WARNING
padlock. ALWAYS check before use
that the chassis is locked. The closed padlock
will be shown.
WARNING
1.5 If the open padlock is visible,
the chassis is NOT locked.
WARNING
If the open padlock icon is visible,
press down on the metal bar, the chassis locks
and you will hear 'click'. Never use the stroller if
the symbol with the open padlock is visible.
1.6 Pull out the telescopic handle.
1.7 Lock both grey clips on the right and left of
the handlebars. Make sure that the telescopic
handlebar clips are properly locked with a
"click".Make sure that the handlebar is at the
same height on both sides before you lock into
place.
WARNING
Ensure that children are kept away
from all moving parts if you adjust the pram to
avoid risk of injury.
1.8 Adjust the handle by pressing the grey
buttons on the inside of the handlebar.
Make sure that they click into position.
WARNING!
Ensure that children are kept away
from all moving parts if you adjust the pram to
avoid risk of injury.

2) ASSEMBLY OF THE REAR WHEELS

2.1 Wipe dirt from the axles before you put on
the
wheels. Press the button on the rear wheel.
Insert the metal shaft axle in the rear wheel.
Ensure that the shaft clicks into the wheel
WARNING
Check that the wheels are firmly
fixed and cannot be pulled off the shaft.
2.2 Push the axle shaft into the chassis.
NXT SELECT V1.0
2.3 Lock the shaft with the grey lock that sits
on the brake bar. The shaft shall click in locked
position.Check that the rear wheel is attached
to the chassis
properly by pulling the wheel. Repeat on both
sides.
WARNING
Check that the wheel is firmly fixed
and can not be pulled from the chassis.
WARNING
Avoid driving over sharp objects or
sufaces eg. glass or the tyre can be punctured

3) ASSEMBLY OF THE FRONT WHEELS

3.1 Press in the button on the front section of
the pram and push in the front wheel. Release
the button and check that the front wheel is
attached to the chassis properly by pulling the
wheel. Repeat on both sides.
3.2 This is how the chassis should look when
fully assembled. (as illustrated in the picture).

4) FOLDING THE CHASSIS

4.1 Take off the carrycot or the seat unit.
Turn the chassis so that the front wheels are
pointing forward (as illustrated in the picture).
Make sure that the shopping basket is empty
before folding the chassis. Brake the stroller by
pressing the brake pedal all the way down.
WARNING
There must not be a child in the
pram when it is folded or unfolded.
WARNING
Avoid having children in the vicinity
when the pram is folded or unfolded.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
4.2 Adjust the handle in the lowest position.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
4.3 Open both clips on the telescopic handle.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
4.4 Push the telescopic handle down to the
lowest point
4.5-4.6 Slide the safety handle all the way to the
side (See arrow 1 located on the safety
handle). Maintain the position and rotate the
safety handle all the way (See arrow 2 located
on the safety handle). Lift the safety handle
firmly upwards and the stroller folds.
WARNING
Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
4.7 The pram is now folded.
EN
43