Harge; Nstalling The Hone; Nstalling The Andset Attery - GE 25881 Guia Del Usuario

Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before using the
cordless handsets.
CAUTION: To reduce the risk of fire or personal injury, use
only the Thomson Inc. appoved Nickel-Cadmium (Ni-Cd)
battery model 5-2459, which is compatible with this unit.
1. Locate battery and battery door which are packaged together inside a plastic bag
and are separate from the handset.
. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: It is important to maintain the polarity (black and red wires)
to the jack inside the compartment. To ensure proper battery
installation, the connector is keyed and can be inserted only one way.
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into place.
6. Place the handsets in the charging cradles.
Allow handsets to charge for 16 hours prior to first use. If you don't properly charge
the handsets, battery performance is compromised.
All manuals and user guides at all-guides.com
PRESS DOWN
FIRMLY
battery
pack
red wire
black wire
9