Before Calling The After-Sales Service - Electro Depot CNF 330 F W701T Instrucciones De Uso

C
Useful information

Before calling the after-sales service

Errors
The refrigerator will give a warning when the temperature of the refrigerator and freezer
reach inappropriate levels or when there is a problem with the appliance. Warning codes are
indicated by the freezer and refrigerator lights.
TYPE OF
MEANING CAUSE
ERROR
E01 Sensor warning
E02 Sensor warning
E03 Sensor warning
E06 Sensor warning
E07 Sensor warning
E08 Low voltage This warning
warning appears when the
power supply drops
below 170V.
24
CORRECTIVE ACTION
Contact a technician as soon as possible
for assistance
Contact a technician as soon as possible
for assistance
Contact a technician as soon as possible
for assistance
Contact a technician as soon as possible
for assistance
Contact a technician as soon as possible
for assistance
- This warning does not indicate a failure
of the appliance. Indeed, the error
prevents any damage to the compressor.
- You must increase the voltage to the
required level.
If this warning persists, contact a
technician as soon as possible for
assistance.
EN
C
Useful information
TYPE OF
MEANING CAUSE
ERROR
E09 The freezer This fault can occur
compartment is as a result of a long-
not cold enough. term power cut.
E10 The refrigerator This fault can occur:
compartment is - As a result of a
not cold enough long-term power
cut;
- After some hot
food has been placed
in the refrigerator.
25
CORRECTIVE ACTION
1. Set the freezer temperature to a
colder setting or set it to the Super Cool
mode. You can then clear the error code
once the required temperature has
been reached. Keep the doors closed
to reduce the time it takes to reach the
correct temperature.
2. Remove any food that thawed when
the error occurred. It must be used
within a short time period.
3. Do not add fresh food to the freezer
compartment as long as the error
persists and the correct temperature
has not been attained.
If this warning persists, contact a
technician as soon as possible for
assistance.
1. Set the refrigerator temperature to
a colder setting or set it to the Super
Cool mode. You can then clear the error
code once the required temperature has
been reached. Keep the doors closed
to reduce the time it takes to reach the
correct temperature.
2. Clear the space in front of the holes in
the air outlet channel and do not place
food near the sensor.
If this warning persists, contact a
technician as soon as possible for
assistance.
EN