B
Using the appliance
Using the refrigerator
Adjusting the temperature of the cooler
• The initial temperature shown on the cooler indicator is 6°C.
• Press the adjustment button once; the setting value starts flashing.
• You can select lower temperatures by pressing and holding the adjustment button. (8, 6,
5, 4, 2, super and eco)
• If you do not press any button for 1 second, your selection will be confirmed and flash 3
times. The alarm beeps.
• When the Super Cool or Economy mode is deactivated or cancelled, the setting returns
to the value selected before the mode was activated. The appliance continues to operate
with this temperature value.
Super Cool mode
How to use it
Press the adjustment button until the Super Cool mode symbol appears on the display. The
alarm beeps. The mode is set.
During this mode:
• Economy mode cannot be selected.
• You can cancel the Super Cool mode by making the same selection.
Economy mode
How to use it
Press the adjustment button until the Eco mode symbol appears on the display. The alarm
beeps. The mode is set.
During this mode:
• The Super Cool mode can be selected. Economy mode is automatically cancelled and the
selected mode is activated.
• You can cancel the Eco mode by making the same selection.
10
EN
B
Using the appliance
Warnings about the temperature settings
• Do not change to a new setting before having validated the current setting.
• After plugging in the refrigerator, it must run for 24 hours without interruption, depending
on the ambient temperature, before your food can be stored under proper conditions. Avoid
opening the refrigerator door frequently and putting a large amount of food in it during
this time.
• The appliance has a delay function of about 5 minutes to prevent its compressor from
being damaged due to power cuts or if you occasionally have to unplug it and plug it in
again. The appliance will resume normal operation after 5 minutes.
• The refrigerator is designed to operate within a specific range of ambient temperatures,
in accordance with the climate class indicated on the rating label. For the cooling to be
efficient, we recommend sticking to the temperature values below.
• This appliance is designed for use at an ambient temperature between 10°C and 43°C.
• Your temperature settings will not be cancelled in the event of a power failure.
• It is not advisable to use the refrigerator in a place where the ambient temperature is
below 10°C.
• The temperature settings should be adjusted according to how often the door is opened,
the amount of food in the refrigerator and the ambient temperature where it is located.
PLEASE NOTE
If the ambient temperature is above 38°C, the freezer temperature cannot
be set to -22°C or -24°C. Only a setting of -16°C, -18°C or -20°C is possible
in this case.
Door open alarm
If the refrigerator or freezer door is left open for more than 2 minutes, the appliance will beep.
11
EN