Devolo MAGIC 2 Manual página 113

45 Network configuration
The devolo Magic adapters offers two different va-
riants for transmitting these encryption keys:
WPS using WPS pushbutton
Start
1
devolo Magic adapter
By pressing the Wi-Fi button on the front
a
side of the device or
By pressing the corresponding Start button
a
on the user interface under Wi-Fi
Pushbutton.
Then either press the WPS key of the Wi-Fi
2
device you are adding or enable the WPS
devolo Magic 2 WiFi 6
the encryption process
mechanism in the Wi-Fi settings of the Wi-Fi
device. Now the devices exchange their encryp-
tion keys and establish a secure Wi-Fi connec-
tion. The Wi-Fi LED on the front panel indicates
the synchronisation process by flashing.
WPS via PIN
To interconnect Wi-Fi devices in your wireless net-
work securely using a PIN variant, go to the web in-
terface and, under Wi-Fi
the WPS PIN generated by your Android smart-
phone or tablet and start the encryption process by
pressing the corresponding Start button.
Use of the WPS method implies the use of the
WPA/WPA2
encryption standard.
When the WPA3 encryption standard is
on the
enabled, the WPS function is not available for
technical reasons.
You can find more information in Chapter
4.4.2 Wi-Fi networks

WPS
Therefore take note of the following automatic
settings:
If under Wi-Fi
b
encryption option is selected in advance,
 
WPS WPS PIN, enter
or WPA2 or WPA2/WPA3

Wi-Fi networks, the No