Configuration - Devolo MAGIC 2 Manual

53 Network configuration
Standby mode is enabled in the devolo Magic
adapter factory default condition.
The LED settings let you disable the LED status dis-
play of the Wi-Fi and Powerline LEDs.
An error status is indicated by corresponding flas-
hing behaviour regardless of this setting.
For information on the LED behaviour of the
devolo Magic adapter in standby mode, re-
fer to Chapter 2.4.1 Reading the PLC indi-
cator light.
You can completely disable the operating but-
tons on the devolo Magic adapter in order to pro-
tect yourself against possible changes. Simply
disable the Enable PLC button or Enable Wi-Fi
button option.
The operating buttons are enabled in the
devolo Magic adapter factory default settings.
Under Time zone, you can select the current time
zone, e.g. Europe/Berlin. The Time server (NTP)
option lets you specify a time server. A time server
is a server on the Internet whose task consists of
providing the exact time. Most time servers are
coupled with a radio clock. Select your time zone
and time server; the devolo Magic adapter auto-
devolo Magic 2 WiFi 6
matically switches between standard time and
summer time.

4.7.3 Configuration

Saving the device configuration
To save the enabled configuration to your compu-
ter as a file, select the corresponding button in the

System Configuration
to File area. The system starts downloading the
current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the
devolo Magic adapter in the System
tion area and enabled there. Select a suitable file
via the Select file ... button and start the operation
by clicking the Restore button.
Factory Settings
The devolo Magic adapter is reset to the original
factory defaults in the System
area with the Factory Reset option.
Doing so causes you to lose your personal
Wi-Fi and PLC settings. The last-assigned
passwords for the devolo Magic adapter
are also reset.

Save Configuration

Configura-

Configuration