Pairing - Establishing A Plc Connection - Devolo MAGIC 2 Manual

17 Introduction
Fig. 3 Network connections
2.4 Pairing – Establishing a PLC
connection
devolo Magic adapters that are in the factory de-
fault condition, i.e. have been recently purchased
or successfully reset (see Chapter 3.5 Removing
the devolo Magic adapter from a PLC network),
automatically start to attempt to pair (establish a
PLC connection) with anotherdevolo Magic adap-
ter when reconnected to the mains supply.
devolo Magic 2 WiFi 6
Starting up a new devolo Magic PLC network
After plugging the devolo Magic adapters into
available power sockets, a new devolo Magic net-
work is established automatically within 3 minutes.
Expanding an existing devolo Magic PLC net-
work by adding another devolo Magic adapter
In order to use a new devolo Magic 2 WiFi 6 in your
devolo Magic- network, first you have to connect it
to your existing devolo Magic adapters devices as a
network. This is accomplished by using a shared
PLC password, which can be assigned in various
ways:
Using devolo Cockpit
b
devolo Home Network App (see Chapter 3.4
Installation of devolo software)
Using the web interface (see Chapter 4.5
b
Powerline)
Using the PLC button as described below.
b
or the