Cleaning And Maintenance; Technical Specifications - cecotec Ready Warm 8700 Power Steel Manual De Instrucciones

ENGLISH
5. OPERATION
• To turn the device on, press the on/off switch (I). The display's light indicator will start
blinking.
• From the remote control, press the on/off button, the light indicator will remain steady
and the display will show P0.
• Use the remote control to select the desired operating temperature:
I: (P1) 800 W
II: (P2) 1600 W
III: (P3) 2400 W
• To turn the device off, first press the On/off button on the remote control, and then press
the On/off switch (1).
• Press the timer button (7) on the remote control to set the timer, from 1 to 24 hours.

6. CLEANING AND MAINTENANCE

• Disconnect the appliance from the power supply and allow it to cool down before cleaning.
• Use a soft, damp cloth to clean the product's surface.
• Clean dust from the device's surface and vents regularly.
• Clean and store the device in a safe, dry place if it is not going to be used for a long period
of time.
• Do not wet the device and try to avoid direct contact with abundant water or any other
liquids.
• Avoid the use of abrasive cleaning agents or scouring pads as these could damage the
product.

7. TECHNICAL SPECIFICATIONS

Product reference: 05363
Product: Ready Warm 8700 Power Steel
Voltage: 220-240 V 50/60 Hz
Power: 2400 W
IP55
36 READY WARM 8700 POWER STEEL