Lubrication Schedule - Husqvarna TS142L Manual Del Usuario

Maintenance schedule
Engine Do a check of the en-
gine oil level.
Change the engine oil
(models with oil filter).
Change the engine oil
(models without oil fil-
ter).
Clean the air filter.
Clean the air screen.
Do an inspection of the
muffler and the spark
arrester.
Replace the oil filter (if it
is equipped).
Clean the engine cool-
ing fins.
Replace the spark plug.
Replace the paper car-
tridge of the air filter.
Replace the fuel filter
Do a check of the muf-
fler. Refer to
check of the muffler on
page 8 .

Lubrication schedule

CAUTION:
pivot points that have special nylon
bearings. Tacky lubricants can attach
dirt. The dirt decreases the life of the
special nylon bearings. If it is necessary
to lubricate the nylon bearings, use only
a small quantity of dry type lubricant.
1
Do more frequently if you operate with a heavy load, in high ambient temperatures, or in dirty condi-
1
Do more frequently if you operate with a heavy load, in high ambient temperatures, or in dirty condi-
3
3
1
Do more frequently if you operate with a heavy load, in high ambient temperatures, or in dirty condi-
3
3
20
Before
each
use
X
To do a
Do not lubricate the
Do more frequently if you operate with in dirty conditions.
Do more frequently if you operate with in dirty conditions.
Do more frequently if you operate with in dirty conditions.
Do more frequently if you operate with in dirty conditions.
At inter- At inter- At inter-
vals of 8 vals of vals of
hours 25 50
hours hours
X
1
X
3
X
3
X
tions.
tions.
tions.
At inter- Each
vals of season
100
hours
1
X
X
1
X X
3
X
X X
3
X
X
X
1707 - 001 - 10.09.2021
Before
storage
X
X