Filling With Water - Honeywell CO30XE Manual Del Usuario

Enfriador de aire portátil por evaporación
Ocultar thumbs Ver también para CO30XE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION
Unplug from power when refilling.

Filling With Water

Unplug the air cooler from power supply.
Check water level indicator located on the front of the unit to
determine the level of water inside the water tank. The water
tank of this cooler holds up to 8 gallons of water. Be sure
water in the tank is always above the minimum water level
mark.
To refill the water tank, open the Water Fill Door located below
the right side panel and fill water to the Max Level, as indicated
on the Water Level Indicator. Do not fill water above the Max
water level mark.
For better cooling performance, it is recommended to put ice
cubes inside the ice compartment located on the top of the
cooler.
After refilling the water tank and loading ice, close the water fill
door, connect the power supply and turn on.
Note :
Running the unit with inadequate water may cause pump
failure.
USE & OPERATION
Water Fill Door
Top Ice Loading Compartment
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido