Taking Your Blood Pressure - AND UA-704 Manual De Instrucciones

TAKING YOUR BLOOD PRESSURE

Tips for Blood Pressure Monitoring:
☞
Relax for about 5 to 10 minutes before measurement.
☞
Remove constricting clothing and place cuff on bare arm.
☞
Unless your physician recommends otherwise, use left
arm to measure pressure.
Now you are ready. Follow these simple steps:
1 .
Sit comfortably with your left arm
resting on a flat surface so that the
center of your upper arm is at the
same height as your heart.
2 .
Lay left arm on the table, palm up
and thread cuff end through metal
loop, smooth side against arm. Then
position the tube off-center toward
the inner side of arm in line with the
little finger.
3 .
Pull the end of the cuff to tighten it, fold
back the extra material, and fasten securely.
The cuff should be snug but not too tight.
You should be able to insert two fingers
between the cuff and
your arm.
E-6
All manuals and user guides at all-guides.com
LifeSource Health Line (Toll-Free): 1-888-726-9966