AND UA-704 Manual De Instrucciones página 11

TAKING YOUR BLOOD PRESSURE
☞
IMPORTANT: Measure pressure at the same time each day .
4 .
Press the START button
5 .
Watch for all display symbols to appear briefly, followed by a
flashing "0", indicating that monitor is ready for measurement.
6 .
If the mark is displayed, the cuff has some air trapped in it.
Press the exhaust valve button until the
You may have to press on the cuff while holding the exhaust
valve to release all the air in the cuff.
7 .
When mark is displayed, begin cuff inflation by squeezing
the inflator bulb repeatedly.
8 .
Stop squeezing the inflator bulb when
until cuff pressure reaches about 30 mmHg to 40 mmHg
above expected systolic pressure. If inflating to a level above
your expected systolic pressure, we recommend using the
chart shown below to determine your inflation level.
Usual Systolic
Up to 130
131-170
171-210
211-250
In Canada (Toll-Free): 1-800-463-5414
All manuals and user guides at all-guides.com
Inflate to
160
200
240
280
mark is displayed.
mark disappears or
E-7