Protos CL Manual Del Usuario página 8

Make sure the tension of the chin strap is the
same on both sides!
5. Cleaning and disinfection
Protos® Integral are technical products and need appropriate treatment and care to
preserve their safety function. Only use substances for cleaning or disinfection that
are not detrimental to the helmet or wearer!The shell and interior of the helmet
can be cleaned with warm soapy water (do not use cleaning machines). Do not use
cleaning agents that contain solvents or aggressive substances. Improper cleaning and
maintenance can adversely affect the protective effect of the product.
6. Safekeeping and storage
The original cardboard packaging protects the product from dirt and UV rays. Please
note that the product should be kept in a well-ventilated, dry place, away from extreme
temperatures and contact with liquids or UV rays! Also ensure that the Protos® Integral is
not subjected to pressure when stored!
7. Accessories and spare parts
– Ear protection with strap (item no.: 204067)
– Ear protection capsules (item no.: 204058)
– Ear protection padding (item no.: 204062)
– Visor (item no.: 204063 (F39), item no.: 204064 (G16), item no.: 204071 (Clear Visor))
– Klima-AIR Set (item no.: 204060)
– Klima-AIR headband (item no.: 204070)
– Maclip chinstrap (item no.: 204043 for EN 397,EN 1077, EN 1078, EN 12492)
– Neck protection (item no.: 204065)
– Protective goggles (item no.: 204090 – clear, grey-mirrored, orange, yellow)
– optical application (item no.: 204094)
– Attachment arm (item no.: 204057)
– Ear protection insulation inserts (item no.: 204059)
– Radio Clip for 3M™ Peltor™ Communications Solutions (item no.: 203019
– Maclip Light Lamp (item no.: 204074/204078)
Once you have made finaladjustments to your
chin strap, the excess part of the strap can be cut
off and the cut edge can then be melted using
a lighter.