Yeedi DVX34 Manual De Instrucciones página 29

No. Malfunction
Robot cannot return to the
3
Self-empty Station.
Robot returns to the Self-
4 empty Station before it has
finished cleaning.
Robot gets stuck while working
5
and stops.
Robot makes much noise when
6
cleaning.
Possible Causes
The Self-empty Station is not correctly
placed.
The Self-empty Station is disconnected or
moved.
Robot is working in a dark environment.
Robot is paused for more than 60 minutes.
Robot did not start cleaning from the Self-
empty Station.
The Ramp Extension is not installed.
Robot is working in a dark environment.
When the battery gets low, Robot
automatically switches to Return to Charger
Mode and returns to the Self-empty Station
to recharge itself.
Working time varies according to floor
surface, room complexity and the Cleaning
Mode selected.
The cleaning area is not tidy.
Robot is tangled with something on the floor
(electrical wires, curtains, Carpet fringing, etc.).
The brushes are tangled, or the dust bin is
stuck.
Solutions
Refer to section 2.2 to correctly place the Self-empty
Station.
Please check if the Self-empty Station is connected to
power. Do not move the Self-empty Station manually.
Make sure to use Robot in a well illuminated environment.
Avoid pausing Robot for over 60 minutes.
Make sure Robot starts cleaning from the Self-empty
Station.
Please install the Ramp Extension so the robot can return
to charge successfully.
Make sure to use Robot in a well illuminated environment.
This is normal. No solution necessary.
This is normal. No solution necessary.
Remove small objects from the floor and tidy up the
cleaning area before Robot starts cleaning.
Robot will try various ways to free itself. If it is
unsuccessful, manually remove the obstacles and restart.
Clear the debris stuck regularly.
29
EN