Turning The Power On/Off; Turning The Power On - Canon DR-3060 Manual Del Usuario

All manuals and user guides at all-guides.com

Turning the Power On/Off

Follow the procedures described below when turning the power on and off.

Turning the Power On

1.
Turn on the scanner.
The power switch is located on the lower right front corner of the scanner. To
turn the scanner on, press the power switch. When the power indicator lights
green, the scanner is on.
2.
Turn on the PC.
Note
If you are using Windows 95/98/Me or Windows 2000, then the first time that
you turn on your PC after connecting this scanner to your PC Windows' Plug
and Play function will automatically display a screen prompting you to install
the scanner driver. (The name of this prompt screen varies among the different
versions of Windows.)
In the case of "New Hardware Found" (Windows 95), select "Select from a
list of alternative drivers" and click OK. On the next screen, select Other
Devices and then click OK.
In the case of "Update Device Driver Wizard" (Windows 95), click Next and
then click Finish on the next screen.
In the case of "Add New Hardware Wizard" (Windows 98), follow the
procedure described below.
1. Click Next.
2. Select "Search for the best driver for your device (Recommended)" and
then click next.
3. Clear all checkmarks and then click Next.
4. Click Next.
5. Click Finish.
Installing the Scanner
19