Manual Flash Mode M; Power Setting; Stroboscopic Flash Mode (Multi) - Rollei 58 Instrucciones

Note:
64
The Canon camera mode: P, TV, AV, M, A - DEP, green frame Nikon mode: P, S, A, M

Manual Flash Mode M

If a manual exposure is needed, you can set the
flash brightness according to your own needs .
The incremental setting of the flash output can be
adjusted from 1/128 to 1/1 power in 1/3 steps .
Select the flash MODE
Press the [MODE] button until the LCD display M .

Power setting

You can adjust the power of the flash output by
rotating the dial clockwise or counterclockwise
(increase or decrease) in the manual mode .
• Icon (increase): 1/128–>1/128+0 .3ev–>1/128+0 .7ev–> . .–>1/32–> . .–> 1/1
• Icon (decrease): 1/1–>1/1-0 .3ev–>1/1-0 .7ev –> . .–>1/32–> . .–> 1/128

Stroboscopic Flash Mode (Multi)

To properly use the Multi mode, set the camera into M mode . If the Multi mode
is used, a series of quick flashes will be emitted . Therefore, several flashes can
be taken in one photo . These lightning settings are often used when recording
moving objects . Please set the flash output power as required, time of flash and
flash frequency (every flashes time shown by Hz) . Please use new batteries or a
fully charged battery when this mode is used . To prevent the flash head against
overheating and damage, do not use more than 10 times strobe flash burst in a row .
Between two repeated exposure operation, let the flash plenty of time for callback .
ENGLISH