Multi Lighting Applications - Rollei 58 Instrucciones

Multi Lighting Applications

84
1. Wireless optical instruction light
You can create two or three slave units to complete the multi - position shooting
requirement . And by the main TTL auto flash shooting the flash set the flash ratio,
manual flash output and strobe output .
(1)Flash light compose two slave unit group's wireless flash .
Setting SLAVE unit: SLAVE c and SLAVE n .
Setting channel: 1, 2, 3, 4
Setting group: Two flash lights setting group A, B
Setting MASTER unit: Setting each group flash mode and output power
Setting flash light ratio: Setting MASTER unit flash light ratio A:B or A:B:C for shoo-
ting (for example: Canon instruction )
(2)Flash light compose three SLAVE unit group's wireless flash
Setting SLAVE unit: SLAVE c and SLAVE n .
Setting channel: 1, 2, 3, 4
Setting group: Three flash lights setting group A,B,C
Setting MASTER unit: Setting each group's flash mode and output power
Setting flash light ratio: MASTER unit flash light ratio setting <A: B C>
(for example: Canon Instruction )
Press down the test button of the MASTER unit to test the flash . If the SLAVE unit
doesn't flash, please check the flash light angle and the right distance .
Note: MASTER unit: If the ratio <RATIO A: B> is set, the flashes of ratio C will
not flash . If the group of three flash light set <A>, they will be controlled by the
MASTER flash light .
ENGLISH