Full Instruction Master Unit; (M, Manul, Master, Nikon) - Rollei 58 Instrucciones

Note: If you have a Nikon MASTER unit you can
select all kind of SLAVE unit group mode and po-
wer . SLAVE group mode and parameter can be set
separately with the MASTER model and parameter .

Full Instruction MASTER Unit

(i-TTL Full Auto, MASTER, Nikon)/ Manual Instruction MASTER Unit

(M, manul, MASTER, Nikon)

If the MASTER unit is in TTL or M mode, you can use the SLAVE unit wireless flash
OFF mode, TTL mode, M mode .
1 . Press the [Parameter setting button] for a long
time, to set up the system Nikon MASTER unit
(MASTER Nikon) .
2 . Press the [Flash mode select button] shortly to
set up Full Auto i-TTL mode or manual mode on
the MASTER Flash Unit .
3 . Wireless instruction flash model
Group A: Press the [Wireless Parameter set-
ting button] to (A) so that the Group A model
power twinkles . Rotate the dial to change
group A model between wireless off, i-TTL and
M . If the setting is done, press the [Wireless
Parameter setting button] again to quit group A
setting and go into group B setting .
Group B: Press the [Wireless Parameter setting
button] to (B) so that the Group B model power
twinkles . Rotate the dial to change group B model between wireless off, i-TTL
and M . If the setting is done, press the [Wireless Parameter setting button] again
to quit group B setting and go into group C setting .
MASTER switch symbol
77