[Zoom] Settings - Rollei 58 Instrucciones

[ZOOM] Settings

Press the 'ZOOM button' until the number in the display begins to flicker . Rotate the
dial to set the appropriate values . Dial clockwise to increase and counterclockwise
to decrease the zoom value . Press the „ZOOM button" again to exit the setup state .
A
Automatic
About Automatic Zoom A and
Manual Zoom M Settings:
Flash head automatically zoom: Rotate the dial to
adjust the flash range . If „A" is shown, the flash
will automatically adjust the flash coverage (boot
initialized to 35 mm) . If the camera is mounted
and uses E-TTL or i-TTL system, the flash bulb will
change as the lens zoom removes front and back
to adapt different flash coverage .
Manually set zoom position: Rotate the dial to
adjust the flash range . If „M" is shown, you can
manually adjust the flash coverage (18, 24, 28, 35,
50, 70, 85, 105, 135, 180) .
• If zoom is adjusted manually, please ensure that the flash coverage covers the
lens zoom, so that the picture will not show the edge of a shadow .
M M M
18 24 28
M M M
35 50 70
M M M
85 105 135 180
69
M