The Various Transtherm Cabinet Models; Installing Your Wine Cabinet - Transtherm Caves Mas 1T Modo De Empleo

The various TRANSTHERM cabinet models

In order to better adapt to differing requirements and usages, there are 3 types
of TRANSTHERM wine cabinets.
The 1 temperature Maturing cabinets:
MAS - MANOIR - ERMITAGE
Designed to store and mature all wines, these cabinets reproduce the exact
conditions of a natural cellar (one constant temperature), irrespective of the
outside temperature (between 0 and 35°C).
The 3 temperature Tasting Cabinets:
COTTAGE - CASTEL
In addition to the central maturing area (1 temperature), these cabinets offer
t wo furt h e r, s p e c i fic compartments for bri n ging a few bottles to room temperat u re
(upper compartment) or for chilling them (lower compartment).
The multi-temperature Service cabinets:
MAS - CELLIER - RÉSERVE
Also re fe rred to as "Day Cellars " , these cabinets are designed, not for mat u ri n g,
but for bringing wines to the right service temperature. They are designed in
s u ch a way as to enable 10 diffe rent temperat u re shelves within the same cab i n e t
(for the larger models).
How do I identify my cabinet model?
R e fer to the make r 's label on the bottom of the inner right wall of your equipment
item (see Page 3 No. 9 - serial number)
All manuals and user guides at all-guides.com
P4

Installing your wine cabinet

When unpacking your cabinet, make sure that there are no traces of impact or
deformation and that there are no surface defects.
Carefully remove all of the protections and adhesive strips from the packaging
around your wine cabinet.
Open the door and make sure all components are intact.
Release the electrical lead.
Move your cabinet to its final location.
The place you have selected for your cabinet should:
- Be unencumbered and well ventilated,
- E n able a minimum 10 cm space between the wall and the back of the cab i n e t ,
- Be well away from any heat source,
- Not be too damp (laundry, pantry, bathroom, etc.),
- Have a solid and flat floor,
- H ave a standard and accessible electricity supply (standard socket to country
standards, linked to ground with differential trip),
- It is NOT recommended to use a multi-socket or extension lead..
In order for you to level off your cabinet as easily as possibl e, it is equipped
with 4 adjustable feet. However, we do recommend that you tighten the
back feet to the maximum and use the front feet to create a level (a spirit
level is recommended for this operation).
WAIT 48 HOURS BEFORE PLUGGING IN THE CABINET
Should you need to move your cabinet, never tilt it more than 45° and always
sideways, on the side that the electrical cable comes out (right hand side when
looking at the cabinet).
P5