Escutcheon
Sprayhead
Membrane
Complete the Installation
Turn on the water to the bodyspray.
Check for leaks behind the sprayhead (between the sprayhead and the ball
joint) and between the sprayhead and the spray face.
If leaks are detected, remove the leaking components and reinstall or
replace.
Locate the drain port on the escutcheon assembly.
Orient the escutcheon assembly so the drain port is centered on the mark
at the 5 o'clock position on the leak shield.
Insert the escutcheon assembly all the way into the leak shield. Twist
clockwise to align the drain port and lock in place.
1083256-9-A
Drain Port
Align drain port
with mark.
4
Escutcheon
Clamp
O-Ring
Setscrew
Leak Shield
Kohler Co.