Publicidad
Idiomas disponibles
Idiomas disponibles
Wireless transmission at 868 MHz
Signal reception intervals of 4 seconds
Low battery indicator
Wall mounting or table standing (foldout stand)
The outdoor temperature sensor
Remote transmission of outdoor temperature
to temperature station by 868 MHz signals
Shower proof casing
Wall mounting and table-standing
If you want to take your product to Central Europe, it will automatically
find the radio controlled time signal. If you want to go to the UK, please
follow the manual time setting option.
Setting up:
Note: This weather station receives only one outdoor sensor.
First, insert the batteries into the temperature sensor. (see "Install
1.
and replace batteries in the temperature sensor").
2.
Immediately after and within 30 seconds, insert the batteries into
weather station (see "Install and replace batteries in the
weather station"). Once the batteries are in place, all segments of
the LCD will light up briefly. Following the time as 0:00 and the
weather icon will be displayed. If these are not displayed after 60
seconds, remove the batteries and wait for at least 10 seconds
before reinserting them.
3.
After inserting the batteries, the weather station will start receiving
data from the sensor. The outdoor temperature and the signal
reception icon should then be displayed on the weather station. If
this does not happen after 3 minutes, the batteries will need to be
removed from both units and reset from step 1.
4.
In order to ensure sufficient 868 MHz transmission however, this
should under good conditions be a distance no more than 100
meters between the final position of the weather station and the
sensor (see notes on "Mounting" and "868 MHz Reception").
5.
Once the remote temperature has been received and displayed on
the weather station, the DCF time (radio controlled time) reception
EN2
Publicidad
