Technoline WS 9910 Manual Del Usuario página 23


Stop the alarm
C2 – + key (Plus)

To make adjustment for various settings

Stop the alarm
C3 – ALARM key

Enter the alarm setting mode

Switch the alarm ON/ OFF

Stop the alarm
C4 – MIN/MAX / RESET key (Min/ Max temperature and resetting)

Press and hold to reset the MIN/MAX temperature records

Activate the snooze

Exit manual setting modes
Manual settings:
The following manual settings can be done in the setting mode:

Time zone

Time reception DCF ON/OFF

Manual time
Press and hold the SET key for about 3 seconds to advance to the
setting mode:
Time zone setting:
The time zone default is "0" hour. To set a different time zone:
1. The current time zone value starts flashing.
2. Use the + key to set the time zone. The range runs from 0, -1, -
2...-12, 12, 11, 10... 2, 1, 0, in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Time reception On/Off
setting.
Set radio-controlled time reception ON/OFF:
EN6