Preset Lock - Bahco TASMB Serie Traducción De Las Instrucciones Originales

STANDARD AND SLIM ELECTRONIC TORQUE-ANGLE BLUETOOTH ® WRENCH
®
AND ELECTRONIC TORQUE-ANGLE BLUETOOTH SCREWDRIVER
Note: Torque cycle is not recorded in memory unless both torque and angle reach targets.
Note: Red progress lights turn on if torque exceeds target + plus tolerance or if angle exceeds
target + plus tolerance while in manual mode.
Note: Red progress lights turn on if torque exceeds maximum torque or if angle exceeds
maximum angle in Preset mode.

PRESET LOCK

Note: Password entry is required to enable Preset Lock. When locked, password entry is required
ENTER button.
2. Preset Lock enable/disable screen is displayed.
3. Use UP/DOWN buttons to select LOCK or UNLOCK selection.
STD
SLIM
33