Powering The Cart On; Powering The Cart Off; Using The I/O Panel - Stryker OR Instrucciones De Uso

Powering the Cart On

To power the Connected OR Cart on:
1. Connect the power cord to supply mains with protective earth.
2. On the front of the cart, in the top-left corner, push the power button.
The power button illuminates, and power is supplied to any consoles or accessories installed on the cart.

Powering the Cart Off

To power the Connected OR Cart off:
1. On the front of the cart, in the top-left corner, push the power button.
The power button illumination turns off and power to the consoles installed on the cart is disconnected.
2. Disconnect the power cord from supply mains.

Using the I/O Panel

An I/O panel on the rear of the cart provides the following connections:
• HDMI
• USB
• DVI
• Ethernet (RJ45)
8 EN
Figure 4 – I/O Panel
P44082 Rev. D