Using The Cart; Putting The Cart Into Transport Position; Moving The Cart - Stryker OR Instrucciones De Uso

Using the Cart

The Connected OR Cart can be moved to the desired location and positioned by one person. The Connected OR
Mount articulated monitor arm enables the monitor to be positioned in the optimal viewing position. Once in position,
the cart can be powered on using the central power button and connected to additional devices using the I/O panel.

Putting the Cart into Transport Position

Before moving the cart, ensure it is in transport position.
To put the cart into transport position:
1. Rotate the monitor 90 degrees to the right side of
the cart.
2. Lower the monitor on the arm.
3. Hook the monitor stow handle in the stow bracket.

Moving the Cart

To move the cart:
1. Disconnect the cart from supply mains and secure the power cord to the cord hooks on the rear door. Ensure
any network or video cables are disconnected from the external I/O panel on the rear of the cart.
2. Ensure that any external components, such as imaging heads, are disconnected.
3. Release the brakes on all four wheels by lifting the foot lever on each wheel.
4. Push the cart from the rear using the transporting handles (rear-facing handles).
5. Move the cart into position, taking care not to block access to supply
mains.
6. When the cart is in its final position, lock all four wheels by pushing the foot
levers down.
7. Release the monitor from the stow bracket by pushing the monitor down
and away from the cart.
8. Using the monitor positioning handles, position the monitor for optimal
viewing.
6 EN P44082 Rev. D