Sartorius YBT01 Instrucciones De Funcionamiento página 18

18
§ Enter a name for the computer; e.g., the
name already assigned by the network
§ Select the computer type from the list;
e.g., "Laptop"
§ Click on [Next] to continue.
> The "Initial Bluetooth Configuration
Wizard" screen is shown again, with a
different message than shown on the
first screen.
§ Click on [Next] to continue.
> The "Bluetooth Service Selection" page
opens.
§ Add or delete checkmarks in the boxes
to select the required Bluetooth services.
Note:
Only the "Bluetooth Serial Port"
service is required for a data connection
between the YBT01 or YDO01C-BT and
the F8T001v2 or F8T012. Activate the
corresponding checkbox to select this
service.
§ Click on the [Configure] button.
> Windows installs the software auto-
matically.
Afterwards, the "Bluetooth Properties"
page opens.