Sartorius YBT01 Instrucciones De Funcionamiento página 6

6
Installation
!
Proceed with extreme caution when using pre-wired
RS-232 connecting cables, as the pin assignments
may not be compatible with Sartorius equipment.
- The operator shall be solely responsible for any
damage or injuries that occur when using cables not
supplied by Sartorius.
!
If there is visible damage to any of the equipment or
power cords, disconnect the equipment from power
and lock it in a secure place to ensure that it cannot
be used for the time being.
IP Rating:
!
The IP65 protection rating for the YBT01 is ensured
only if installation is performed correctly in accor-
dance with the instructions and acknowledged tech-
nological standards. The IP67 protection rating for
the YDO01C-BT (Option B2) is ensured only when it
is installed in the Combics CIS indicator correctly in
accordance with the instructions and acknowledged
technological standards.
The YDO01C-BT must be installed and tested by
a certified technician.
Using the Equipment in the EU:
– The model YBT01 and YDO01C-BT (Option B2)
equipment is intended for use only in the following
countries:
Austria, Belgium, Denmark, Finland, France (indoor
use only), Germany, Greece, Iceland, Ireland,
Liechtenstein, Luxembourg, Norway, Portugal,
Spain, Sweden, Switzerland, The Netherlands, United
Kingdom.