Sartorius YBT01 Instrucciones De Funcionamiento página 8

!
8
Equipment Supplied for YDO01C-BT (Option B2)
– YDO01C-BT (RS-232 adapter)
– Connecting cable
– Angle plug
– Antenna
– Seal
– Nut (1)
– 2 printed circuit boards (PCBs)
– Packaging (not with factory-installed Option B2)
– Plastic bag (not with factory-installed Option B2)
– Equipment designation labels (2) (not with factory-
installed Option B2)
– Operating instructions (this manual)
Installation Instructions
The YBT01 and YDO01C-BT (Option B2) wireless
interfaces are designed to provide reliable results
under normal ambient conditions. When choosing
locations to set up your equipment, please observe
the following to ensure fast and precise operation
of the YBT01 or YDO01C-BT (Option B2) wireless
interface:
– Position the interfaces for optimum signal trans-
°C
mission between devices.
Important Note:
Solid obstacles such as walls can restrict the trans-
mission range.
– Avoid placing the equipment in close proximity to
a heater or otherwise exposing it to heat or direct
sunlight.
– Avoid locations that are subject to excessive vibration
– Protect the wireless interfaces from highly concen-
trated aggressive chemical vapors.
– Avoid locations subject to excessive moisture
– The wireless interfaces must not be used in
hazardous areas/locations, nor in areas in which
explosive gases or dusts are present.
– The equipment may not be operated in areas
potentially endangered by explosive material, nor in
locations in the medical industry.