Dreame P10 Manual Del Usuario página 20

Care & Maintenance
EN
Cleaning the Soft Roller Brush Bar
1. Push the brushbar head release button
in the direction of the arrow until the cover
of the brushbar head pops to open, then
remove the brushbar head by lifting it in
the direction indicated.
Note: Use small tools to pry the clip away.
3. Remove the pre-filter. Rotate the cyclone
assembly slightly to remove from the dust
bin.
16
2. Use scissor to cut off the hairs and fibers
that stick on the roller brush. Wipe the dust
from the notch and transparent cover with
a dry cloth or paper towel.
4. Rinse the cyclone assembly, pre-filter,
and dust bin until they are clean. After
washing, air dry for at least 24 hours .
11
10
24 hrs
9
8
7
12
1
2
3
4
5
6