Cable Connection - Samsung SPD-3000 Manual Del Usuario

Installation

Cable Connection

1. First, connect one end of the BNC video
cable connector to the Video Output
Terminal.
2. Next, connect the other end of the
connector to the Video Input
Terminal of the monitor.
3. Then, connect the Power Adapter Cable. Use a driver (-) to screw one part of
the Power Adapter consisting of two lines to the
Power Input Terminal of the camera
holder.
4. Connect the Power Adapter's plug to the Power Outlet.
5. Connect the Controller Connection Terminal
of SPD-3000/2300 and the external Controller.
24
SPEED DOME CAMERA
All manuals and user guides at all-guides.com
Monitor In Terminal Video Out Terminal
Monitor
Power Adapter
DATA BOX Controller Connection
Terminal
Controller
User's Manual
Installation of SPD-3000/2300
• Installation Precautions
- Check out the installation place. It should be strong enough to support more
than 4 times the total product weight including speed dome camera (SPD-
3000/2300) and installation structure.
- Install the camera in a place having more than 500mm of space above the
ceiling board.
- Install the camera holder using the provided installation guide tab, screw and
fastening cable.
- There is a risk of camera falling during installation. Prevent the fall using the
fastening cable while installing the camera. Also, access of other people to
the place should not be allowed during installation.
• Accessories Sold Separately
Use the following accessories sold separately for convenient installation
depending on installation places.
1) On-Ceiling Installation Mount (STB-330PC)
This mount is used to install the camera on the ceiling.
2) Indoor Insertion Housing (STH-330PE)
This housing is used to attach the speed dome camera to
the ceiling for installation.
SPEED DOME CAMERA
25
User's Manual