Camera Holder Connection; Camera Holder Initial Setting - Samsung SPD-3000 Manual Del Usuario

Part Names and Functions

Camera Holder Connection

Notes
• In order to control the speed dome camera by personal computer, exclusive program
should be used.
12
SPEED DOME CAMERA
All manuals and user guides at all-guides.com
User's Manual
Camera Holder Initial Settings
Setting Communications Protocol
Use the SW3 of installation bracket to set the communications protocol.
SW3 Protocol
0 Samsung
1 Samsung
2 Pelco-D
3 Pelco-D
4 Pelco-D
5 Pelco-P
6 Pelco-P
7 Samsung Elec.
8 Samsung Elec.
9 Panasonic
A Panasonic
B Vicon
C Vicon
D Honeywell
E AD
F Bosch
Notes
• If the speed dome camera is controlled by the Panasonic and Vicon controller, please
contact with our company custom satisfication part and technical part.
• Control setting(When using AD Protocol)
- The AD Protocol is only valid for RS-422
- In relation to controller compatibility
1. Display Camera OSD : 3 + Auxiliary ON
2. Exit Camera OSD : 3 + Auxiliary OFF
3. ENTER : IRIS OPEN
4. ESC : IRIS CLOSE
• Please see our homepage for details on the protocol
SPEED DOME CAMERA
Baud Rate(BPS)
9,600
19,200
2,400
4,800
9,600
4,800
9,600
9,600
19,200
9,600
19,200
4,800
9,600
9,600
4,800
9,600
13
User's Manual