Sequence Setting - Samsung SPD-3000 Manual Del Usuario

Functional Description
Image Adj. : Clarity of the video signal and saturation of the color may be
adjusted.
Sharpness : The overall sharpness of the image can be adjusted.
Colour : The overall colour density of the image can be adjusted.
Freeze : Moving image can be stopped and replayed.
ON : Image can be frozen.
OFF : Frozen image is released and the film is replayed.

2) Sequence Setting

• Sequence Setting Menu
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
Preset : 13 items such as Pan/Tilt location, Zoom and Focus are selected among
camera functions and they can be called for monitoring. Total 128 points
can be preset.
Setting : Select the Preset number for setup. Adjust Pan/Tilt/Zoom and press the
Enter key to save the setting. If you want to change the 13 items such as
Focus, Brightness, Iris and Scene Adj., use the Up/Down key to go to and
select the item. If you don't want to change the 13 items, press the ESC
key to go to the next Preset step.
Edit : You can edit the 13 preset items such as Pan/Tilt location, Zoom and
Focus, which are selected among camera functions.
Execute: Select the Preset number for execution.
42
SPEED DOME CAMERA
All manuals and user guides at all-guides.com
Preset
Setting
Edit
Execute
Clear
Status
User's Manual
Clear : Select the Preset number to delete for clearing.
Status : The current Preset number setup is displayed.
• Motion Detection Setting
Select Motion Detection in the Preset Setting menu and then turn on the mode.
Notes
• When the illumination is shaking under direct lighting such as a fluorescent lamp, it may
cause malfunction of the camera. MD function is not recommended under this condition.
• When brightness of objects fluctuates suddenly due to lighting of flashlights or
headlights or the lamp going on/off, it may cause malfunction of the camera.
• The purpose of this security function is not to prevent accidents or crimes such as
fire or burglary. Our company is not responsible for the injury or damage caused by
the inadequate use of this function.
• Preset Menu Setting
1. Select the Preset item on the Sequence Setting Menu
2. Select the Setting item.
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume OFF
3. Select the Preset number.
4. Set up the Zoom and Focus.
Preset Setting
Preset=001 (1~128)
SPEED DOME CAMERA
Preset
Setting
Edit
Execute
Clear
Status
Preset Setting Z>ZOOM
PST 1 : ZOOM PST 2 : FOCUS
43
User's Manual