Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Functional Description
3) P/T Setting
Pan Limit : The moving range in the Pan direction can be limited.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Position : Moving range can be set up. Set the position from the left using the
joystick and the Execution key. The stop position may change due to the
initialization by such operation as power resumption depending on
position setting. This does not mean it is out of order.
On/Off : When this function is on, the limit is effective. Default setting is Off.
Tilt Limit : Moving range in the tilt direction can be limited.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Position : Moving range can be set up. Set the position from the top direction
using the joystick and the Execution key. The stop position may change
due to initialization by such operation as power resumption depending
on position setting. This does not mean it is out of order.
On/Off : The application of limitation will be determined. Default setting is Off.
48
SPEED DOME CAMERA
All manuals and user guides at all-guides.com
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Prop. P/T
ON
Digital Flip
ON
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Prop. P/T
ON
Digital Flip
ON
User's Manual
Area Setting : Areas can be indicated. Areas can be designated up to 8.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Area Name : Area name can be set up. Use the joystick and the Execution key
to enter the area name. A maximum of 12 letters (English,
Chinese, numbers) can be entered. When you finish inputting the
name, adjust the position mark to "SET" using the joystick and
press the Execution key. This is the end of Area Name setting.
Area Position : Area range can be designated. Use the joystick and the Execution
key to determine the position from the left. If the area range is
overlapped, the smaller area number will indicate the overlapping part.
On/Off : It can be determined whether or not to activate the area mark. The
activation becomes effective as soon as the position moves from the
current area to other areas. Set up the OSD Setting as ON. If it is in OFF
mode, this function does not work. Default setting is OFF.
Area Masking : If you want to exclude some areas for surveillance, they can be
turned into black. You can mask 4 parts of one screen (maximum
32 parts).
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
49
SPEED DOME CAMERA
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Prop. P/T
ON
Digital Flip
ON
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Prop. P/T
ON
Digital Flip
ON
User's Manual
Publicidad
Capítulos
Tabla de contenido
