G-U BKS B-2193 Serie Manual De Instalación página 42

Installation instructions
B-2193x | B-2393x
Motor-driven shoot-bolt lock for timber and steel doors
42
U
max
I
I
min
The B-2393x or B-2193x motor-driven shoot-bolt lock can be operated with
a nominal current of 2–4.2 A.
The amount of operating current depends on the loads exerted on the door leaf.
If only low loads are anticipated due to gasket sealing forces, wind load, draught, etc.,
a corresponding power supply unit with low output can be used. A power supply unit with a higher
output is therefore especially recommended at external doors and in staircases.
The diagram below can be used as a decision-making aid. The green area represents the operating
range of the motor-driven shoot-bolt lock.
EN
24 V DC ± 10%
2 A–4.2 A
100 mA
F [N]
06.2019 | 22288S | Designed in Germany