Grizzly Tools GHS 2842 B Traducción Del Manual De Instrucciones Original página 81

Trituradora de rodillos silenciosa
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 100
• Switch the shredder off and pull
the plug under the following cir-
cumstances:
- when you are not using the
device,
- transporting it or leaving it
unattended;
- before releasing a jammed
blade.
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance work
or replacing accessories;
- Before moving or lifting the
shredder
- If foreign objects should enter
the shredder, if the shredder
is making unfamiliar noises or
vibrations (check the shred-
der for damage before start-
ing it up again)
• Do not allow shredded material
to accumulate near the ejection
area. This may otherwise hin-
der proper ejection and force
the material back up through
the feeder.
• Do not transport or tip the
shredder with the motor run-
ning.
• Keep hands, other body parts
and clothing out of the filling
chamber and ejection channel
and away from other moving
parts.
• In the event of blockages in
the machine intake or ejection,
switch off the motor and dis-
connect the machine from the
mains before removing leftover
material in the intake opening
or ejection channel. Ensure
that the motor is free of rub-
bish and other accumulations
in order to safeguard the motor
from damage or possible fire.
Remember that the cutting tool
is also activated when the start-
ing mechanism is started on a
motor operated machine.
CAUTION! The following
states how damage to the
trimmer and possible injury
to people can be avoided:
• Handle the unit with care.
Clean the ventilation slits regu-
larly; keep to the maintenance
instructions.
• Do not overload your device.
Work only within the indicated
range of performance. Do not
employ any low power ma-
chines for heavy work. Do not
use your device for purposes
for which it has not been de-
signed.
• Only switch the shredder off
once the funnel feeder is com-
pletely empty since the shred-
der may otherwise clog up and
not be able to start afterwards.
• Do not attempt to repair the
shredder yourself unless you
are qualified to do so. Any work
not specified in this manual
may only be carried out by our
service centre.
Electrical safety
CAUTION! The following
states how to avoid ac-
cidents and injuries due to
electric shock:
GB
81

Publicidad

Tabla de contenido
loading

Tabla de contenido