Scope Of Delivery; Assembling The Shredder; Operation; Start-Up - Grizzly Tools GHS 2842 B Traducción Del Manual De Instrucciones Original

2. Pull the collecting box out of the
chassis and take out the shred-
der unit and accessories.
3. Check the scope of delivery:

Scope of delivery

• Operation and Safety Notes
• Shredder unit
• Chassis
• Collector box
• Two running wheels and two adjust-
able feet with assembly material
• Spanner
• Allen key
• Instruction Manual

Assembling the shredder

1. Screw the two wheels (13) to
the chassis (9) with the mount-
ing material provided.
2. Clip the wheel covers (14) into
the wheels (13).
3. Screw the two adjustable feet
(12) to the chassis (9).
4. Fasten the shredding attach-
ment (5) to the chassis (9) with
the four screws provided.
5. Make sure that the safety switch
(10) is set to the "OFF" position.
6. Slide the collection box (11)
along the guide rail into the
chassis (9). The collection box
can only be inserted in one di-
rection.
7. To lock the collection box, push
the safety switch (10) up as
far as it will go so that only the
green "ON" field is visible.

Operation

Start-up

Before initial start-up, check that the
shredder is attached to the chassis cor-
rectly and that the collection box and the
safety switch ( ) are in the correct posi-
tion.
The device will not turn on if the
collection box and safety switch
are not in the correct position.

Switching on and off

Achten Sie darauf, dass die Netzs-
pannung mit den Angaben des
Typenschildes übereinstimmt.
1. Make a loop in the end
of the extension cable
and suspend this in the
cable strain relief (7) on
the mains cable (see
No. 6).
2. Re-connect the extension cable.
3. Make sure that the hopper (see
No. 3) is empty before switching on.
4.
2
1
Turn the rotary switch to the right. The
device is now in continuous operation.
5. Fill the hopper with the material to be
shredded (s.
à The material is drawn in and
shredded.
6. To turn off, turn the rotary switch (see
, No. 3) to the left to the OFF posi-
tion.
GB
To start the device,
slide the rotary
switch lock
(see , No. 2) in
the direction.
, No. 3).
,
,
83