Environmental Protection - BGS technic 62674 Manual Del Usuario

INSTRUCTIONS
Example: Injector removing BMW engine N20 / N55
1. Loosen the screws of the original retaining bridge.
2. Remove the original retaining bridge.
3. Install the base plate without tie bolts by using distance sleeves and screws.
4. Align the base plate, insert the tie bolts and fasten them on the injector.
5. Tighten the fixing screws and pre-tension the tie bolts by hand.
6. Use a spanner on the hexagon and pull out the injector by turning clockwise.
7. Loosen the fixing screws.
8. Remove the complete tool with screws, tie bolts and injector.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information. Dispose of this product at the end of its working life environmentally
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed