Intended Use - BGS technic 8890 Manual De Instrucciones

Car Voltage and Current Tester | 1 - 48 V
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This meter is fast, accurate and safe to use and is used to measure current directly to the fuse socket
and voltage measurement. The unit features a large LCD display and mini / ATO fuse probe, making
it ideal for the diagnosis of electrical circuits in the automotive sector.
SPECIFICATIONS
Current measurement: max. 30 Ampere at 48 VDC for 10 seconds, Accuracy: ±1%
Voltage measurement: 1 - 48 VDC, Accuracy: ±1 %
Wrong polarity: When user reversely connects the polarity, the display show "ERR".
Continuity test: LCD display shows "ERR" if the measured resistance is less than 1 kohm.
Working temperature: 0°C to 50°C (32°F to 122°F)
Storage temperature: -20°C to 60°C (-4°F to 140°F)
Moisture: <70% RH (working); <80% RH (storage)
Maximum height: 2000 m (7000 ft)
Power: 1x 9V battery
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8890
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed